Alarm Modules and Accessories
Accessory Modules
Voltage Reducer
Modules and Accessories
It reduces the output voltage and you can connect 0-30V inputs to this module and you can adjust the output voltage on 5 and 9V and you can adjust it to be variable between 2-16 V.
A/D to A/B Module
Modules and Accessories
Converting the negative input to a serial input to control the alarm, which makes the alarm armed or disarmed by applying negative voltage to the alarm converter.
Voltage Multiplier
Modules and Accessories
It is used to increase or stabilize the supply voltage and can increase the input voltage of 9V to 15V with a current of 3A
Trigger Module
Modules and Accessories
It is used to change the type of input trigger to positive or negative in Dialer devices
4 Channel Transmitter and Receiver
Modules and Accessories
Without any need for wiring from the alarm to the devices, you can control up to 4 devices (2 relay outputs and 2 negative outputs)
Addressable Output
Modules and Accessories
This output can do time programming and turn on and off up to 4 electrical devices without using the alarm and only through keypad control.
Hopping Receiver Module
Modules and Accessories
The receiver converts the learning code into a hopping code so that the remote code may not be hacked.
Two Output Siren Module
Modules and Accessories
It is used to connect horn speakers, and using this module you can connect up to 4 speakers with the volume adjustment.
External Remote Receiver 315
Modules and Accessories
If the range of the remote and wireless sensors are short, you can connect this wired receiver to the device and install it in a suitable place.
External Remote Receiver 433
Modules and Accessories
If the range of the remote and wireless sensors are short, you can connect this wired receiver to the device and install it in a suitable place.
Single Relay Interface
Modules and Accessories
If the consumption current is higher than the output current of the alarm, it is necessary to use an interface relay.
Four Relay Interface
Modules and Accessories
If the consumption current is higher than the output current of the alarm, it is necessary to use an interface relay.
NS20 Alarm to Network Communicator
Modules and Accessories
This communicator connects the alarm to the network and allows you to manage and monitor the devices through software. It can connect you to both the local network and internet.
NC4 Sensor to Network Communicator
Modules and Accessories
This communicator connects the sensors to the alarm system via the network. Therefore, you can connect sensors to the alarm no matter how far they are from each other and the alarm will start alerting whenever the sensors are triggered.
Alarm Modules and Accessories
There are many modules and supplies that you may need for your new alarm system or that you may want to add to your old system to have a better use of it. This is where you will find an assortment of alarm supplies and accessories for all Anik Alarms.
For instance, installing an alarm in a vacation residence may have challenges such as the alarm having a distance from the key fob range, low siren volume, distance between sensors and checking the cooling and heating systems remotely. All these problems can be solved, using a proper accessory module.
